Ads by ArduinoGetStarted.com
cos()
Description
Calcule le cosinus d'un angle (en radians). Le résultat sera entre -1 et 1.
Syntaxe
cos(rad);
Paramètres
- rad: l'angle en radians (float)
Valeurs Renvoyées
- Le cosinus de l'angle (double)
Exemple
void setup() {
Serial.begin(9600);
for (int angle = 0; angle <= 180; angle += 15) {
float angle_rad = angle * M_PI / 180;
float cos_result = cos(angle_rad);
Serial.print("cos(");
Serial.print(angle);
Serial.print("°) = ");
Serial.println(cos_result);
}
}
void loop() {
}
The result in Serial Monitor:
COM6
cos(0°) = 1.00
cos(15°) = 0.97
cos(30°) = 0.87
cos(45°) = 0.71
cos(60°) = 0.50
cos(75°) = 0.26
cos(90°) = -0.00
cos(105°) = -0.26
cos(120°) = -0.50
cos(135°) = -0.71
cos(150°) = -0.87
cos(165°) = -0.97
cos(180°) = -1.00
Autoscroll
Clear output
9600 baud
Newline
※ ARDUINO BUY RECOMMENDATION
| Arduino UNO R3 | |
| Arduino Starter Kit |
Disclosure: Some links in this section are Amazon affiliate links. If you make a purchase through these links, we may earn a commission at no extra cost to you.
Additionally, some links direct to products from our own brand, DIYables.
Additionally, some links direct to products from our own brand, DIYables.