Ads by ArduinoGetStarted.com
bitClear()
Descripción
Borra (escribe un 0) en un bit de una variable numérica.
Sintaxis
bitClear(x, n)
Parámetros
- x: la variable numérica cuyo bit se quiere borrar
- n: el bit a borrar, comenzando por 0 del bit menos significativo (más a la derecha)
Retornos
- Ninguno
Ejemplo
Demonstrates the use of bitClear() by printing the value of a variable to the Serial Monitor before and after the use of bitClear().
void setup() {
Serial.begin(9600);
byte x = 0b10000100; // the 0b prefix indicates a binary constant
Serial.print("BEFORE: ");
Serial.println(x, BIN); // 10000100
bitClear(x, 2); // clear the third bit
Serial.print("AFTER: ");
Serial.println(x, BIN); // 10000000
}
void loop() {}
The result in Serial Monitor:
COM6
BEFORE: 10000100
AFTER: 10000000
Autoscroll
Clear output
9600 baud
Newline
※ ARDUINO BUY RECOMMENDATION
| Arduino UNO R3 | |
| Arduino Starter Kit |
Disclosure: Some links in this section are Amazon affiliate links. If you make a purchase through these links, we may earn a commission at no extra cost to you.
Additionally, some links direct to products from our own brand, DIYables.
Additionally, some links direct to products from our own brand, DIYables.