Arduino - Hardware Preparation

Starter Kit

1	×	Official Arduino Uno
1	×	Alternatively, DIYables ATMEGA328P Development Board
1	×	USB 2.0 cable type A/B (for USB-A PC)
1	×	USB 2.0 cable type C/B (for USB-C PC)
1	×	DIYables Sensor Kit 30 types, 69 units
1	×	Recommended: Screw Terminal Block Shield for Arduino Uno
1	×	Recommended: Breadboard Shield for Arduino Uno
1	×	Recommended: Enclosure for Arduino Uno
1	×	Recommended: Prototyping Base Plate & Breadboard Kit for Arduino UNO

Disclosure: Some links in this section are Amazon affiliate links. If you make a purchase through these links, we may earn a commission at no extra cost to you.
Additionally, some links direct to products from our own brand, DIYables .

Or you can buy the separate components as below list.

Basic Requirement

1	×	Official Arduino Uno
1	×	Alternatively, DIYables ATMEGA328P Development Board
1	×	USB 2.0 cable type A/B (for USB-A PC)
1	×	USB 2.0 cable type C/B (for USB-C PC)
1	×	Breadboard
1	×	Jumper Wires

Optional Sensors/Actuators

1	×	Breadboard-mount Button with Cap
1	×	Breadboard-mount Button Kit
1	×	Panel-mount Push Button
1	×	Push Button Module
1	×	LED Kit with resistor
1	×	LED (red)
1	×	Ultrasonic Sensor
1	×	HC-SR501 Motion Sensor
1	×	Keypad 3x4
1	×	Keypad 3x4 and 4x4 Kit
1	×	Alternatively, Keypad 3x4
1	×	Alternatively, Keypad 4x4
1	×	LCD
1	×	3-24V Active Piezo Buzzer
1	×	Active Piezo Buzzer Module
1	×	Passive Piezo Buzzer Module
1	×	Potentiometer
1	×	Alternatively, Potentiometer Kit
1	×	Alternatively, Potentiometer Module with Knob
1	×	Relay
1	×	Servo Motor
1	×	Touch Sensor
1	×	Light Sensor
1	×	DS18B20 Temperature Sensor (WITH Adapter)
1	×	DS18B20 Temperature Sensor (WITHOUT Adapter)
1	×	Electromagnetic Lock
1	×	Door Sensor
1	×	Arduino Motor Shield R3
1	×	Stepper Motor

Buy Note: Many DS18B20 sensors on the market are low-quality. We highly recommend buying the sensor from the DIYables brand using the link above. We tested it, and it worked well.

Optional Tools

The Best Arduino Starter Kit

See the best Arduino kit for beginner